An ideal replacement for multiple analog meters, the PowerLogic ION6200’s modularity allows genset and electrical equipment manufacturers, panel shops, EMS manufacturers and energy service providers to reduce inventory requirements by stocking inexpensive components and building specific meter configurations as needed, rather than carrying a large inventory of pre-configured meters.
The PowerLogic® ION6200 meter is an ultra-compact meter that offers outstanding quality, versatility and functionality in a low cost, flexible meter.
The meter is suitable for myriad applications such as substation monitoring, revenue metering/sub-metering and cost allocation and is an excellent fit for both energy providers and energy consumers.
It offers an excellent upgrade path, allowing you to start with a low cost base model and add new features and capabilities as requirements evolve.
It can be integrated with our ION® EEM enterprise energy management software, ION Enterprise® operations software or other automation or SCADA system.
Multiple form factors - Include integrated models with a built-in display that fit in an ANSI 4” cutout, transducer models without a display that can be fastened to a flat surface, and an optional remote display module.
The user can pre select two BAS drivers (serial, Ethernet and or LonWorks) to be loaded
on the QuickServer at no extra charge.
Additional drivers are available at extra cost.
Common combinations of drivers include Modbus RTU, Modbus TCP, BACnetIP, BACnet
MSTP, LonWorks, JCI Metasys N2 and SNMP. QuickServer is ready to configure for the
specific application.
All necessary instructions and software are included with QuickServer.
If the user prefers the unit to be pre-configured prior to delivery, FieldServer offers a
custom configuration service.
QuickServer is a high performance, fully configurable, cost effective Building and
Industrial Automation gateway for integrators to easily interface devices to networks
in commercial buildings and industrial plants.
System integrators world-wide have benefited from the value of the powerful line of
interoperability gateways offered by FieldServer Technologies. Now, QuickServer
adds to that value by running the same robust FieldServer protocol conversion software
ware on a highly cost effective platform backed by the experience, engineering expertise
and proven technical support that integrators have come to expect from FieldServer.
QuickServer Key Features:
Ability to interface up to 250 points of common BAS protocols
Multi-configuration capability; specific configurations selectable via DIP switches or
software
Flat panel mount standard, DIN rail mount option DIP switches to select baud rate or node ID on the fly
BACnet COV support for fast data communication while reducing the traffic over a BACnet network
FieldServer Offers:
Largest protocol driver library in the industry, providing the solution to your integration needs
Over 10 years of experience in design and manufacture of building automation gateways with thousands of installation, over 700 translation paths
using over 100 protocol drivers
Trusted, proven technical support before and after shipment
FieldServer Technologies partners with BAS and Fire Alarm Panel manufacturers and trade associations to ensure that the drivers and hardware meet your
highest industry expectations
Accessories:
Optional Accessory Kit includes AC power supply, DIN mounting bracket assembly, Ethernet cable, mini-screwdriver and a USB flash drive with all data sheets,
manuals, ENotes and more.
LonWorks® is a trademark of Echelon Corporation ®
Specifications
Field Connections
FS-QS-1010-XXXX
Ethernet 10/100 RJ45
Two Serial RS-485 terminal (up to 115K baud)
FS-QS-1011XXXX
Ethernet 10/100 RJ45
Serial RS-485 terminal (up to 115K baud)
FTT-10 LonWorks port
Environment
Operating temperature: -40° to 75°C (-40°to 167°F)
Relative humidity: 5-90%; RH non-condensing
Power Requirements
Current draw @ 12V
FS-QS-BAS-1010: 150 mA
FS-QS-BAS-1011: 279 mA
Configuration/Diagnostic Utilities
Capacity: 250 point
Table, Wall or DIN rail mount
Physical Dimensions (WxDxH)
4.5 x 3.2 x 1.6 in. (11.5 x 8.3 x 4.1 cm)
0.4 lbs (0.2 Kg)
Approvals
UL/ULC 916
FCC part 15 pending
CE Mark pending
BTL Mark pending
LonMark pending
Ordering Information
QuickServer FS-QS-101X is available in multiple default driver configurations. Other FieldServer driver configurations are also
available (check www.fieldserver.com/QuickServer/ for additional information. The most common drivers for building automation
systems are Modbus RTU, Modbus TCP, BACnet/IP, BACnet MS/TP, JCI Metasys N2, LonWorks and SNMP. QuickServers utilizing these
drivers include:
Other protocol combinations are available, check with us for details
Options
FS-8915-36-QS Accessory Kit, 110/220V
The Accessory Kit consists of a temporary power supply, Ethernet cable, Screwdriver, DIN Rail Mount, and USB flash drive of all
manuals, data sheets and ENotes.
Schematic and PDF Documents
Images will open in their own window
